How To Draw A Six Sided Polygon

Download Article

Download Article

Loosely-defined, a hexagon is any polygon with half dozen sides, but a regular hexagon features vi equal sides and six equal angles. Await at pictures of hexagons to get a ameliorate idea of what you're drawing. In a pinch, consider simply tracing an existing motion picture of a hexagon. Use a ruler and a protractor to describe a perfect hexagon. For a rougher hexagon, try using a round shape and a ruler to guide your hand. If precision is non paramount, and then feel gratis to sketch out a uncomplicated hexagon using only a pencil and a creative mind.

1. 1

   Draw a circumvolve with a compass. Place a pencil in your compass. Widen the compass to an appropriate width for the radius of your circle. It tin be just a few inches or centimeters wide. Next, identify the betoken of the compass on the paper and sweep the compass around until you've created a circle.

   • Sometimes it'due south easier to draw a half-circle in one direction, and then to come up back and draw another one-half-circle in the other direction.

2. 2

   Move the compass point to the edge of the circle. Movement it towards the top of the circle. Practice not alter the angle or settings of the compass.

   Ad

3. 3

   Make a pocket-sized mark on the edge of the circumvolve with the pencil. Get in singled-out, but non as well nighttime -- you'll exist erasing it afterwards. Remember to maintain the angle you've set for the compass.

4. 4

   Move the compass signal to the marking you made. Place the point right on the marker.

5. 5

   Make another marking on the edge of the circle with a pencil. This should create a second mark a distance away from the first mark. If you've been moving clockwise or counterclockwise around the circle, continue to do so.

6. 6

   Make the last four marks using the aforementioned method. You should end up dorsum at the mark where you originally started. If you lot don't, information technology'south likely that the angle of your compass changed while y'all worked, possibly from squeezing it too firmly or letting it loosen a fleck.

7. vii

   Connect the dots with a ruler. The six places where your marks cross the border of the circumvolve are the half-dozen points of your hexagon. Use your ruler and a pencil to draw a straight line segment that connects the adjacent dots.

8. 8

   Erase your guiding lines. These include your original circle, the marks along the edges, and any other marks y'all made along the way. One time yous've erased your guiding lines, your perfect hexagon should be consummate.

   Advertisement

1. 1

   Trace the circular rim of a drinking glass with a pencil. This will create a circumvolve. It'southward important to use a pencil because yous'll need to erase the marks you made afterward. Yous can too trace the rim of an upside-down mug, a jar or nutrient container, or anything else with a round base.

2. 2

   Depict a horizontal line through the center of your circle. Yous tin can utilise a ruler, book, or any straight edge to practise this. If you do take a ruler, you tin find the halfway marking by measuring the vertical length of the circle and splitting information technology in half.

3. 3

   Draw an X over the halved circle, splitting it upwards into half-dozen equal sections. Since you already have a line running down the center of the circle, the X will have to exist taller than it is broad to keep the pieces fifty-fifty. Just think of this as slicing a pizza into half dozen equal pieces.

4. 4

   Turn each of the 6 sections into triangles. To do this, merely employ a ruler to draw a directly line under the curved function of each section, connecting information technology to the other two direct lines to form a triangle. Repeat this procedure six times. Yous can think of this as forming a "chaff" effectually your pizza slices.

5. 5

   Erase your guiding lines. The guiding lines include the lines in your original circle, the three lines that separate the circle into six sections, and any other marks you fabricated along the way.

   Advertisement

1. i

   Draw a horizontal line. To describe a straight line without a ruler, but draw a starting and ending dot for the horizontal line. Then identify your pencil on the starting dot and go along your eye on the ending dot as yous draw a straight line toward information technology. This line tin be simply a few inches or centimeters long.

2. ii

   Draw two diagonal lines from the ends of the horizontal line. The diagonal line on the left side should be opening up toward the left, and the diagonal line on the right side should be opening up toward the right. You tin think of each of these lines forming a 120 degree angle with the horizontal line.

3. 3

   Draw two more diagonal lines moving inward from the bottom edges of the outset ii diagonal lines. They should create a mirror-image of the first two diagonal lines. The line on the lesser left should await like a reflection of the line on the top left, and the line on the bottom right should look like a reflection of the line on the summit right. While the top lines were moving outward from the top horizontal line, the bottom lines should move inward from the bottom edges of the top lines, toward the space where the base will be.

4. 4

   Draw another horizontal line connecting the two bottom lines. This will form the base of the hexagon. It should ideally be parallel to the top horizontal line. This will complete your hexagon.

   Advertizing

Add New Question

• Question

  How can I figure how wide the sides of a hexagon should be if I know the bore?

  

  If you know the diameter of a circle that touches the corners of the hexagon, this is easy. Halve the diameter to get the length of your hexagon's sides. The reason being, a regular hexagon can be divided into six equilateral triangles past drawing straight lines betwixt opposite corners. These lines are the diameter of the circle that touches the corners of the hexagon, and also twice the length of a triangle side. If you mean you lot know the diameter of a circle that fits inside the hexagon, then this takes a little more math, just again cutting the number in half. That's the summit of one of your equilateral triangles. Knowing that, yous tin can once again calculate the length of the sides.

• Question

  How practise I draw a hexagon with all sides equal but not all angles?

  

  Using a compass, just set the compass to any random setting and start marking points. Placing the concluding indicate is a little rougher -- but draw circles around the two finish points and put the final betoken at ane of the 2 intersections of the circles.

• Question

  Will the radius be equal to each side of the hexagon?

  

  Yep, because a regular hexagon tin exist made using 6 equilateral triangles, and then the radii of the hexagon will be equal to the side lengths.

• Question

  What is the radius of a circle?

  

  The radius of a circumvolve is the distance from its middle to its border.

• Question

  Practice you accept any tips on drawing a trapezoid?

  

  Utilise the instructions to draw a perfect hexagon, and so erase the lesser three lines. Connect the left and right lines with a straight line. The trapezoid is complete.

• Question

  How do I describe a hexagon that is outside the circumvolve?

  

  You demand the inscribed hexagon for the vertices as references. From the centre, use a straightedge to draw a notch at each vertex radially outward, or perpendicular to the surface of the circumvolve. Use a perfect corner to draw a transverse line left and right of the vertex notch, extending past the projection of the bisecting normal of each inscribed hexagon side wall. Repeat for all half-dozen and you have a circumscribed hexagon that is the exact orthogonal to the inscribed.

• Question

  How do I draw a decagon?

  

  Use a compass to draw a circle, describe ten points evenly spaced around the circle, and and then connect them with straight lines.

• Question

  How practise I construct a hexagon if I know the side length, but I don't have the diameter of the circumvolve?

  

  The side length is the radius of the circumvolve. Fix your compass to the side length and from the centre of the hexagon draw your circumvolve. The circumvolve will inscribe the hexagon. The heart of the hexagon tin can be found past cartoon lines from each signal of the hexagon to the indicate reverse. They will all intersect at the eye.

• Question

  How exercise I draw a hexagon with two lines of symmetry?

• Question

  What would I practise to become the Hexagon drawn up with a specific acme?

  

  Elevation corner to corner = ii ten side length. Height side to side = 2 ten side length * sin(60 deg) (~ .866).

Bear witness more answers

Enquire a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

VideoRead Video Transcript

• For accurate measurements, it is wise to bank check the angle sizes of the hexagon.

• The point of the pencil on the pair of compasses needs to exist kept sharp in order to minimize errors from marks that are as well wide.

• If, while using the compass method, you connect every other marker, instead of all half-dozen marks, you will terminate up with an equilateral triangle.

• Make sure that you describe the circle lightly so that you tin can erase information technology easily.

Thanks for submitting a tip for review!

Advertisement

• A compass is a sharp musical instrument; please handle with care to foreclose injury.

Ad

Why This Works

• Either method works to create a perfect hexagon by forming vi equilateral triangles with the radius every bit the length of all of the sides. The six radii drawn are all of the same length and the six chords drawn to create the hexagon are each the same length as the radius because the compass width was non changed. Because the six triangles are all equilateral, the angles betwixt the vertices are each threescore°.

Things You'll Demand

• Paper
• Pencil
• Ruler
• A pair of compasses (the kind used for drawing circles is technically referred to as a "pair of compasses" to distinguish information technology from a navigator's compass, which has a magnetic Due north/South, etc.) or a drinking glass/mug
• Something to put under the paper so that the compass point doesn't slip
• Eraser
• Protractor

About This Article

Article Summary X

To draw a hexagon, starting time by tracing something circular to make a circumvolve. Then, apply a ruler to draw a horizontal line through the center of the circle. Side by side, accept the ruler and draw an "10" over the circle then it'south divided into 6 equal parts. Subsequently y'all depict the "ten," plow each department into a triangle by drawing a straight line betwixt neighboring points along the circumvolve. Finally, erase the circle, the "x," and the horizontal line you lot drew at the beginning and you lot'll be left with a hexagon! Keep reading the article if you want to larn how to use a compass to draw a hexagon!

Did this summary help y'all?

Thanks to all authors for creating a page that has been read ane,147,811 times.

Did this article assist you?

Source: https://www.wikihow.com/Draw-a-Hexagon

Posted by: harrisonsiquene.blogspot.com

Share this post